CVD Graphene
Scroll down for PRICE

Monolayer CVD Graphene on Copper

Circular Monolayer Graphene on Cu foil, Diameter= 4"                                                      Single Layer Graphene on Copper foil: 2"x2"   Single Layer Graphene on Copper foil: 4"x2"  Single Layer Graphene on Copper foil: 4"x4"

Appearance (color): Transparent
Transparency: > 97%
Coverage: > 95%
Grain size: Up to 10 μm
Thickness of Copper Foil: 18 μm for circular and 20 μm for the rest

We offer graphene films that are predominantly single-layer graphene. These graphene films are grown on copper foil and continuous across copper surface steps and grain boundaries. Graphene is grown on both sides of the copper foil. If you require specifically graphene on one side only, please contact us directly

    Etching of the underlying copper foil allows the carbon films to be transferred to other substrates such as glass, silicon dioxide or plastic films.

    To the best of our knowledge, there is no report of degradation of the CVD graphene over time when it is kept in a safe, dry place. The copper foil with single-layer graphene can exhibit some coloration due to slow oxidation of the copper foil, which does not affect the quality of the graphene film.


    • Graphene electronics
    • Conductive coatings
    • Aerospace industry
    • Support for metalic catalysts
    • Microactuators
    • MEMS and NEMS
    • Chemical and bio sensors
    • Multifunctional Materials Based on Graphene
    • Graphene Research
    • Graphene Transfer. See our Graphene Transfer Guide for more details.

The most prominent features of the Raman spectrum of graphene are: a) the D-line, located at 1350 1/cm, b) G-line at 1580 1/cm and c) 2D-line (or G'-line) located at ~2675 1/cm. The number of microscopic defects in the graphene can be determined by the intensity of the D-line. The spectrum of perfect, defect-free graphene does not have a D-line. The D-line can also originate from the grain boundaries, chemical doping, and several other factors. We consider single-layer graphene to be of appropriate quality if the ratio of the intensities of the D and G lines does not exceed 0.1.

We welcome custom orders. Contact us for more details regarding the producrs and to discuss your project today!


(shipping charges included)

4" Monolayer Graphene on Circular Cu foil

SEK 4830

Single Layer Graphene on Copper foil: 2"x2" 

SEK 2955

Single Layer Graphene on Copper foil: 4"x2" 

SEK 4830

Single Layer Graphene on Copper foil: 4"x4"

SEK 8585

CVD Graphene on Copper