FLEXIBLE SILVER/GRAPHENE CONDUCTIVE EPOXY G6E-FXSG
Scroll down for PRICE

FLEXIBLE SILVER/GRAPHENE CONDUCTIVE EPOXY G6E-FXSG


KEY FEATURES

  • Flexible Silver/Graphene filled epoxy

  • Excellent electrical conductivity, volume resistivity ~0.0005 Ω·cm

  • Tough and Durable

  • Perfect for die attachment and solderless interconnections

  • Glass transition temperature 39 °C

      INTRO

      Conductive epoxies can be used to form an electrically conductive bond between dissimilar materials eliminating the need for soldering. Traditional silver-based epoxy materials require up to 80% weight load of silver fillers and as a result tend to be costly, brittle and prone to mechanical failure.

      Our Flexible Silver/Graphene Epoxy G6E-FXSG™ has been developed based on advanced proprietary technology that requires 25% or less silver content to be at par with leading silver based epoxies in terms of electrical properties. This improvement not only brings price of the material down but also makes G6E-FXSG™ less prone to fracture and allows for stronger adhesion to the target substrate.

      Flexible Silver/Graphene Epoxy G6E-FXSG™ is a two component adhesive for high performance bonding, sealing and coating purposes. G6E-FXSG™ is intended to be cured at elevated temperatures. It can cure at room temperature in 24 hours or much more rapidly at elevated temperatures. Recommended curing temperature is 140°C-160°C. Volume resistivity of as low as 0.0005 Ω·cm can be achieved under optimum curing conditions.

      G6E-FXSG™ has smooth paste like consistency after mixing and bonds well to a wide variety of substrates including metals, composites, ceramics, glass and plastics. This product is recommended for flexible electronics, membrane switches, medical devices, electronic packaging applications such as die attachment and solderless interconnections, component repair, display interconnections.

      PRODUCT INFORMATION

      TWO COMPONENT SYSTEM: Part A - smooth thixotropic silver paste, Part B - smooth thixotropic silver paste.

      THE MIX RATIO: 100 (Part A) to 100 (Part B) by weight.

      CURING INSTRUCTIONS: Best results are obtained when the product is cured at one of the following rates: 24 hours @ 25°C, 3 hours @ 60°C followed by 30 minutes @ 140-160°C or 1-2 hours @ 140-160°C.

      Color: Silver

      Pot life: 1 hour

      Glass Transition Temperature: 39°C (cured at 140°C-160°C)

      Mixed Viscosity at 25°C/77°F: 110 - 125 Pa.s at 25°C/77F

      Hardness, Shore: >40D

      Volume Resistivity: ≤ 0.0005 Ω·cm

      STORAGE: Shelf life: 6 months at 25°C in unopened, unmixed containers. Stores and ships at room temperature-no freezing or dry ice required

      MIXING INSTRUCTIONS: Stir both components before use. Add Part B to Part A and mix slowly until uniform in a separate container.

      SAFETY & HANDLING: Please read the SDS before use. Use it with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from the skin.

      Packaging: Part A and Part B are packaged in jars with quantities of 15g, 25g and 40g each. This epoxy can be customized to any quantity as per the customer's requirement.

      APPLICATION NOTES

      • Flexible high frequency shields, waveguides, circuits, membrane switches

      • Flexible sensors, medical devices

      • Attachment of electro-optical components

      • Grounding, repair of defect traces / tracks or creating smooth jumpers on PCB board.

      • Lightning Strike Protection and EMI/RFI Shielding

      • Terminal attachment to solar cell panels

      • Quick and inexpensive mounting of LEDs

      • Conductive traces on 3D printed parts

      • Radio-frequency identification (RFID) tags

      • 3D antennas

      • Smart textiles, wearable electronics

      • Lower temperature bonding of electrical modules


    PRICE LIST

    (Shipping charges included)

    FLEXIBLE SILVER/GRAPHENE CONDUCTIVE EPOXY G6E-FXSG: 30g (15g + 15g)

    SEK 1140

    FLEXIBLE SILVER/GRAPHENE CONDUCTIVE EPOXY G6E-FXSG: 50g (25g + 25g)

    SEK 1480

    FLEXIBLE SILVER/GRAPHENE CONDUCTIVE EPOXY G6E-FXSG: 80g (40g + 40g)

    SEK 1900

    FLEXIBLE SILVER/GRAPHENE CONDUCTIVE EPOXY G6E-FXSG